Dry Ice Blasting:
the solution for mold removal
Dry ice blasting can achieve amazing results due to the speed in which
mold is removed from surfaces. Dry ice blasting provides efficient and
environmentally safe mold removal. The process is non-toxic, non-corrosive
and produces a quality clean. The presence of mold can be eliminated from
contaminated surfaces in a fraction of the time it takes to sand and wire
brush, allowing residents to return to their home or businesses quickly.
Dry ice blasting for mold removal employs all the same containment and
safety parameters needed for any mold remediation project, however it can
replace the sanding and wire brushing process. By using the dry Ice
Blasting process, it can reduce the cleaning time by 50 percent or more
and provides a detailed cleaning including tight corners and trusses,
nails and other obstruction and can even safely blast around electrical
wiring and plumbing without causing any damage. Click here for dry ice blasting video - fast mold removal
How does Dry Ice Blasting
work?
This mold decontamination and remediation technique can be compared to
pressure washing. They both use a wand at high pressure to clean a
surface. The difference is with Dry Ice Blasting, there is no spraying
water. Instead, it is cleaning surfaces with the dry ice and the dry ice
particles disappear immediately upon contact with the target surface and
thus leaving behind no foreign contamination. This removes the mold
quickly without damaging the surface. This process not only gets rid of
mold but other contaminates that may have been present as well.
Where does the mold go?
Dry ice blasting causes the mold to relocate into the air. This is good
because now it can be removed from the air with a HEPA filter and air
scrubbers. When the mold remediation process is complete, technicians
perform a HEPA vacuum of the remaining debris from the areas treated and
apply a micro-biocide, which will restrain any additional mold growth.
Advantages of Dry Ice
Blasting
- Less time consuming
- Less labor intensive
- Non-polluting
- Non-corrosive
- Non-conductive
- Non-explosive
- Natural biocide
Benefits for Mold
Remediation
- Extremely fast removal
-reduces removal time by 60% to 80%
- Remediation can take
days, not weeks
- Clean and
environmentally friendly mold removal process leaving no secondary waste
- Minimizes demolition
Dry ice blast
cleaning is thoroughly effective in all environments -industrial,
commercial, and residential. Whether the remediation project is large or
small call Arizona Environmental Group
How should mold be
cleaned?
When mold, harmful bacteria or viruses are present, Arizona Environmental
Group has the experience to
properly and quickly remove it.
There are several disinfection and remediation methods available to
properly treat mold or bacteria contaminations. Some of which may require
minimal downtime and demolition if any at all.
Mold cleanup must be done with caution. If not properly handled, mold
spores can drift throughout a house contaminating multiple areas quickly.
Mold growth can occur within 24-48 hours of moisture intrusion. Any
underlying water problems must be fixed to
successfully eliminate mold problems.
Call the experts at Arizona Environmental Group to determine which
method is right for you.
|
